Filbert pocket camp offers a compact and efficient drying solution for small to mid-sized harvests. Designed for horticulture post-harvest operations, it combines portability with consistent airflow control.
This system is favored by growers who need rapid moisture reduction while preserving terpene profiles and physical integrity. The following sections outline its specifications, operational modes, and maintenance expectations.
| Model | Capacity (kg) | Power (kW) | Airflow Mode |
|---|---|---|---|
| Filbert Pro 250 | 25 | 1.8 | Top-down radial |
| Filbert Flex 350 | 35 | 2.4 | Cross-flow with filters |
| Filbert Max 500 | 50 | 3.5 | Hybrid vertical-horizontal |
Setup and Environmental Calibration
Proper installation begins with level placement on a stable, non-flammable surface. Ambient temperature and humidity in the staging area should be within manufacturer ranges to avoid premature drying or clumping.
Drying Cycle Parameters
Optimized drying cycles balance temperature ramping and moisture extraction. Lower temperature preserves aromatic compounds, while staged airflow prevents surface hardening.
Airflow Distribution and Filter Maintenance
Uniform airflow is critical to prevent pockets of high moisture and overheating. Regular inspection and cleaning of pleated filters sustain consistent performance and reduce contamination risk.
Throughput and Footprint Efficiency
Filbert pocket camp units maximize drying density per square meter. Their modular stacking option allows facilities to scale capacity without major layout changes.
FAQ
How long does a typical drying cycle take?
Cycle duration varies by moisture content and batch size, generally ranging from 4 to 8 hours for initial moisture drop below critical thresholds.
Can I dry other botanicals in the same unit?
Yes, the system supports multiple botanicals as long as you adjust airflow and temperature setpoints to match the material density and oil volatility.
What filter grade is recommended for terpene preservation?
A medical-grade activated carbon pleated filter with sub-micron rating captures residual volatiles while minimizing particulate exhaust into the surrounding environment.
How often should the heat exchanger and fans be serviced?
Scheduled maintenance every 200 operational hours, including thermal inspection of the heat exchanger and bearing lubrication for centrifugal fans, sustains efficiency and safety compliance.
Operational Best Practices and Scaling
Refining workflow around Filbert pocket camp leads to higher throughput and reproducible quality.
- Pre-condition material to a uniform initial moisture level to stabilize cycle times.
- Monitor inlet and outlet humidity with calibrated sensors at each stage.
- Log temperature and pressure data for each batch to support quality audits.
- Plan filter replacement intervals based on particulate load and terpene profile.
